PureFlow AirDog FP-100 Manual de instalación descargar pdf (Pagina 10)

Installation Manual Section 5

PUREFLOW® DIESEL SYSTEM

AirDog™

FUEL LINES

THIS SECTION IS APPLICABLE TO STOCK AND SLIGHTLY MODIFIED ENGINES.

Fuel Suction Line

5 - 1 From end of fuel line supplied with attached 'Quick Disconnect' fitting, measure and

cut length of line required to connect fuel tank SUCTION port to AirDog™ inlet port

marked "Fuel In".

5 - 2 Install #8 female swivel x 1/2" 'push lock' fitting into other end of fuel line

(Ref. 5-1).

Fig. 3 Fuel line installation

5 - 3 Remove the original fuel suction line from fuel tank by squeezing the tabs on the end

of the connector together. Consult factory manual if unsure. Connect the 'New Fuel

Line' Quick Connect fitting to fuel tank by pushing the connector onto the tank

supply tube until connector seats. Check connection for seating.

Fig. 4

# 8 Flare Fitting

Fuel Line

To AirDog™

fuel “in” port

fuel tank

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Sin comentarios

PureFlow AirDog FP-100 Manual de instalación Pagina 10